Page 1 of 1

Johnson K50

Posted: Fri Nov 09, 2018 3:23 pm
by cookie1
A new arrival
WIN_20181109_105225.JPG
WIN_20181109_105225.JPG
WIN_20181109_105225.JPG

Re: Johnson K50

Posted: Fri Nov 09, 2018 3:31 pm
by cookie1
WIN_20181109_105351.JPG

Re: Johnson K50

Posted: Fri Nov 09, 2018 4:56 pm
by Oyster 49
Was that on ebay a couple of weeks ago?

Re: Johnson K50

Posted: Fri Nov 09, 2018 9:54 pm
by cookie1
I found it on Shpock !

Re: Johnson K50

Posted: Sat Nov 10, 2018 5:42 am
by wbeaton
1930. Nice find. Looks like you will need some spare parts.

Re: Johnson K50

Posted: Sat Nov 10, 2018 10:04 am
by cookie1
Thanks , I believe the bracket might not be too hard to get but maybe not in the UK . If anyone has one I'd be interested

Re: Johnson K50

Posted: Sun Nov 11, 2018 6:34 am
by Nudge
Is there any movement in any of the parts that should move? looks like it is well seized.

K50 I'm guessing it is 5HP

Re: Johnson K50

Posted: Sun Nov 11, 2018 9:53 am
by cookie1
I've been told its 8hp although the tank is marked as 12 , apparently thats on all of them . It is fairly stuck overall but I'm optimistic . I just need to approach with caution as any broken bits will be hard to replace

Re: Johnson K50

Posted: Mon Nov 12, 2018 3:57 am
by wbeaton
It is rated for 8 hp. American outboard manufacturers were in the midst of a horsepower race when the Johnson ā€œ12ā€ was produced. The Outboard Boating Club of American (OBC) standardized horsepower ratings a few years later and the K-50ā€™s rating was dropped down to a more realistic 8 hp.

I thought the K50 was only produced in 1930, but it seems it was made from 1930-32. If you post the serial number I can tell you the exact year.

Re: Johnson K50

Posted: Sun Nov 18, 2018 7:58 pm
by cookie1
Hi ,

The serial number is 141702 , I was advised that its a 1930 model with a later block but I'd welcome any further info

cheers

Re: Johnson K50

Posted: Tue Nov 20, 2018 9:39 pm
by wbeaton
It is a 1930 according to the serial number. Iā€™m not familiar enough with them to know if the powerhead is correct for the year.

Re: Johnson K50

Posted: Tue Nov 20, 2018 10:29 pm
by cookie1
Thanks for that , don't suppose you know of a bracket that would fit ?