Magnatwin

Talk about interesting old outboards which aren't Seagulls here

Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo

Post Reply
User avatar
cookie1
Posts: 216
Joined: Wed Apr 13, 2016 10:04 pm
Location: Orkney , Scotland

Magnatwin

Post by cookie1 » Tue Aug 14, 2018 9:37 pm

Rescued from the jaws of the crusher !
You do not have the required permissions to view the files attached to this post.

User avatar
Nudge
Posts: 785
Joined: Sun Feb 15, 2015 2:43 am
Location: Auckland, New Zealand

Re: Magnatwin

Post by Nudge » Wed Aug 15, 2018 6:35 am

Looks like quite a large outboard.

Is most of it there?

Tell us a bit more about it.
"THE KING OF BLING"!
Is it better to over think, than not think at all?

User avatar
cookie1
Posts: 216
Joined: Wed Apr 13, 2016 10:04 pm
Location: Orkney , Scotland

Re: Magnatwin

Post by cookie1 » Wed Aug 15, 2018 7:20 am

From what I've read on internet its 18hp , built around 1960 and was way ahead of its time . Seems to be all electrically controlled and rather than have a reversing gearbox you restart the engine backwards to come astern . I read some other stuff on this site from years back . This one is a bit battered but I think mostly complete and not seized . I would like to get it running but could be a nightmare ! It looks like they were only produced for a couple of years so maybe wasn't a roaring success !

User avatar
Oyster 49
Posts: 3144
Joined: Tue Oct 26, 2010 6:55 pm
Location: Derbyshire, UK

Re: Magnatwin

Post by Oyster 49 » Sun Aug 19, 2018 11:27 am

Quite a rare outboard, it will be interesting to search out parts for sure. I think that one had a remote battery/fuel tank?

User avatar
cookie1
Posts: 216
Joined: Wed Apr 13, 2016 10:04 pm
Location: Orkney , Scotland

Re: Magnatwin

Post by cookie1 » Tue Aug 21, 2018 10:28 pm

Yes I think you're right , I don't think it will run without a battery , there is no pull start option !

User avatar
Charles uk
Posts: 4699
Joined: Wed Feb 27, 2008 4:38 pm
Location: Maidenhead Berks UK

Re: Magnatwin

Post by Charles uk » Wed Aug 22, 2018 12:23 am

Most of these were 12 volt, but late models were 24V, so take care.

These have a very complicated 5 piece crankshaft not including the con rods, with ball races, bronze & needle roller bearings, if the crank needs a rebuild & if you can find anyone to do it, don't expect any change from £500.

I can't see the reverse lock in your pics does it have one?

This is unlikely to be a quick easy restoration.
Make it idiot proof and someone will make a better idiot.

User avatar
AusAnzani
Posts: 984
Joined: Wed May 21, 2014 10:47 am
Location: Australia
Contact:

Re: Magnatwin

Post by AusAnzani » Wed Aug 22, 2018 12:24 am

Nice find.

Not sure if you've already searched these forums. If not check out the links below, as they contain lots of Magnatwin information and pictures.

viewtopic.php?f=3&t=5707&p=49070&hilit=Magnatwin#p49070

viewtopic.php?f=4&t=6345&p=57398&hilit= ... ion#p57354

I am aware of one only in Australia, owned by SOS member Collector Inspector. He may be able to provide additional information/assistance, should you need it.

Regards,
Spiro

User avatar
cookie1
Posts: 216
Joined: Wed Apr 13, 2016 10:04 pm
Location: Orkney , Scotland

Re: Magnatwin

Post by cookie1 » Thu Aug 23, 2018 10:33 pm

Thanks for the comments and info . The reverse lock is intact . It's only the second outboard I've heard of that starts backwards to go astern . I worked on a ship years ago with a six cylinder Deutz that did the same . Anchor was always prepared when coming onto harbour just in case it didn't restart !

Post Reply