Miniature Engine Display

[Collector Inspector]

This is my Number One Christmas Present to Me From Me. Arrived the other day.

While I have subsequent progressive numbers from this........I attach:

High End Piece - Unmounted - Anderson Spitfire "65" 1948 complete with coil.

Have a Great Break!

BnC
[/b][/color]

[Charles uk]

If it ever get's stolen Bruce & I'm in WA, check my pockets for that & your Wankel.

But it's the 4 strokes that will go in my pockets first!

[water bug]

G,day. Here is one more stand. I have cast them occasionally. WB

[Charles uk]

I've got one of your cast stands, Art, very nice, it came from Eric.

[Collector Inspector]

G,day. Here is one more stand. I have cast them occasionally. WB DSCN9125s.JPGDSCN9124s.JPG

Hi Art and great to seeya back Dude!

BnC

[Collector Inspector]

A large French Thing!

I love it to bits aye.

R.E.A that will clean up very nicely.

BnC[/color][/b]

[Nudge]

very nice simple looking engine... But I do have one question, what is the round knob/ leaver by the flywheel for?
Make that two questions. What is R.E.A. ?

[Collector Inspector]

very nice simple looking engine... But I do have one question, what is the round knob/ leaver by the flywheel for?
Make that two questions. What is R.E.A. ?

R.E.A. is the brand name. Some history and general information can be found here...

http://www.adriansmodelaeroengines.com/ ... ?cat_id=76

It is a spark engine. The lever is the advance retard.

BnC
[/color][/b]

[Collector Inspector]

So back to mounts for display.

I have MKs 1 thru 3 of these Atoms.

The problem is that the wee tanks are kind of a problem in that the mounting plate of the crankcase is about 1/2 way the total height of the motor.

I am thinking using bent Brown Tip Silver Solder, bending for legs and each side with a small hardwood mounting/land.

Any ideas?

Cheers

BnC[/color][/b]

[Nudge]

What about some 3mm aluminium sheet bent in a U shape with a fork cut into one of the sides of the U for the engine to sit in?

Nice engines, Keep the pics comming!!

[Collector Inspector]

English Mills. MkII 1.3cc. Unused - Never run.

"Doonside" Mills 0.75cc MkII. Never run. Made by Taipan AU with a lot of heritage.

There is one like it on Ebay at the moment.

http://www.ebay.com.au/itm/252699804706 ... EBIDX%3AIT

Still sorting

BnC[/color][/b]

[Collector Inspector]

Very sexy...............

ENYA 0.06D 1959 Never run.

BnC[/color][/b]

[Collector Inspector]

Sorry....last one for tonight as it kinda fell out and I managed to catch it......................

A delicate Japanese Geisha (or similar cartoon )

G-Mark 0.61 RC Early 70s. Very small RC throttle and completely unnecessary artistic design. One of my "Little Dears"

BnC[/b][/color]

[Collector Inspector]

I may as well Keep going as making a list of everything slowly.

MS-29 Sydney 1949-50.

Made by Bill Mardon and Harold Stevenson.

This one of the supposed 42 produced.

Piston ring is gummy........

BnC[/color][/b]

[Collector Inspector]

What about some 3mm aluminium sheet bent in a U shape with a fork cut into one of the sides of the U for the engine to sit in?

Nice engines, Keep the pics comming!!

Not sure in picturing that.......it will come to me no doubt.

This is a bit elaborate.

BnC[/color][/b]