Owners of Australian Riptide Outboards - Call to Action

Talk about interesting old outboards which aren't Seagulls here

Moderators: John@sos, Charles uk, RickUK, charlesp, petergalileo

AusAnzani
Posts: 644
Joined: Wed May 21, 2014 10:47 am
Location: Australia
Contact:

Re: Owners of Australian Riptide Outboards - Call to Action

Postby AusAnzani » Mon Mar 27, 2017 8:31 am

Hi Hugz,

I think that's a fair assumption to make, the Fisherman was the most common/popular of all Riptide models.

Thus far I have serial numbers for 8 Riptide Fisherman outboards on record, and know of several others for which I am yet to collect serial numbers. Those belong to;

Hugz x 1
AusOB_Collector x 1
Collector Inspector x at least 2 but I suspect more
Notav8 x 2
Chair (from The Board) x 1
Jonmac (from Vintage Mowers) x 1

And there have been several others on Ebay and Gumtree that I've not bothered to pursue for serial number information.

The second most common (I suspect) would be the Boatman for which I have collected 6 serial numbers. Fisherman Deluxe x 2, Sportsman x 3 and Sea Scout x 1.

Regards,
S

User avatar
Hugz
Posts: 2557
Joined: Wed Mar 14, 2007 4:41 am
Location: Sydney

Re: Owners of Australian Riptide Outboards - Call to Action

Postby Hugz » Mon Mar 27, 2017 8:46 am

I see on Trove (government data base) that the Sydney powerhouse museum has a fisherman and the Sydney Marintime Museum had one a few years ago though that might be one and the same. Next time I'm visiting I'll see if l can get info even if only a photo.

https://collection.maas.museum/object/212998

Also: https://collection.maas.museum/object/213341

AusAnzani
Posts: 644
Joined: Wed May 21, 2014 10:47 am
Location: Australia
Contact:

Re: Owners of Australian Riptide Outboards - Call to Action

Postby AusAnzani » Tue Mar 28, 2017 12:15 am

Both of those Riptides are very nice indeed.

If you click on 'More info' you can see when they were donated to the museum and by whom.

Fisherman - Donated by W. Woods in 1983. The name rings some bells, possibly an employee of the Riptide Outboard Motor Company but I will need to dig our my notes.

Sportsman - Donated Barry J Sheltrum in 1983. Son of Leonard Fredrick Sheltrum, founder of the Riptide Outboard Motor Company

As for ratings for the Fisherman and Fisherman Deluxe, the brochure pictured below states 4 b.h.p for both at 3000rpm. All other engine details are the same also.

Image

Image

Image

Image

Regards,
S

User avatar
Hugz
Posts: 2557
Joined: Wed Mar 14, 2007 4:41 am
Location: Sydney

Re: Owners of Australian Riptide Outboards - Call to Action

Postby Hugz » Wed Mar 29, 2017 7:09 am

Great brochure!!!

Here is my other motor. It is a runner.

59/6039 A Westcott Hazell motor then.
riptide engine number (1).jpg


The tank doesn't have those triangular legs/rests that earlier ones have. Presumably people were more responsible by then.
riptide engine number (2).jpg


Did any of the Fishermen's have decals?
riptide engine number (3).jpg


Note the pull out knurled knob to lock the motor in an up tilt position. My earlier one doesn't have that.
riptide engine number (4).jpg


If you are a visitor and wish to see the pics, come along for the ride and register on this forum and all shall be revealed.
You do not have the required permissions to view the files attached to this post.
Last edited by Hugz on Wed Mar 29, 2017 8:59 am, edited 1 time in total.

User avatar
Hugz
Posts: 2557
Joined: Wed Mar 14, 2007 4:41 am
Location: Sydney

Re: Owners of Australian Riptide Outboards - Call to Action

Postby Hugz » Wed Mar 29, 2017 8:52 am

I've started identifying the differences between the two motors and the glaringly obvious one is the magneto and pull cord sheaf.

The earlier one is a larger diameter and deeper with Riptide on the sheaf.
riptide mag.jpg


Whilst the later ('59) is somewhat smaller and more humble, close to a seagull size.
Riptide mag '59.jpg
You do not have the required permissions to view the files attached to this post.

AusAnzani
Posts: 644
Joined: Wed May 21, 2014 10:47 am
Location: Australia
Contact:

Re: Owners of Australian Riptide Outboards - Call to Action

Postby AusAnzani » Wed Mar 29, 2017 11:06 am

Good work Hugo,

Notice the difference in the tank mounting brackets?

Decals, yes. I'm sure I have seen an image somewhere that shows there were decals applied to the tank ends of at least some riptide fisherman outboards.

Will post more when I get a chance.

May have a small gift for you also. Let me work on that aye.

Regards,
S

User avatar
Hugz
Posts: 2557
Joined: Wed Mar 14, 2007 4:41 am
Location: Sydney

Re: Owners of Australian Riptide Outboards - Call to Action

Postby Hugz » Thu Mar 30, 2017 6:14 am

Here is the owners manual. (left click to enlarge)
3.5 HP?
Riptide Brochure 0.JPG

Looks like the earlier Riptide with the deeper and wider Magneto and earlier tank mount. Later tank mount has prongs to protect tank while earlier ones have triangles on the tank itself.
Riptide Brochure 1.JPG

Riptide Brochure 2.JPG

Riptide Brochure 3.JPG


Ha!! Amal carb was standard.
Riptide Brochure 4.JPG
You do not have the required permissions to view the files attached to this post.
Last edited by Hugz on Thu Mar 30, 2017 6:40 am, edited 4 times in total.

User avatar
Hugz
Posts: 2557
Joined: Wed Mar 14, 2007 4:41 am
Location: Sydney

Re: Owners of Australian Riptide Outboards - Call to Action

Postby Hugz » Thu Mar 30, 2017 6:16 am

Cont'd. If any visitors have info on Riptides please join the forum and share. Most appreciated!

Riptide Brochure 5.JPG
You do not have the required permissions to view the files attached to this post.

AusAnzani
Posts: 644
Joined: Wed May 21, 2014 10:47 am
Location: Australia
Contact:

Re: Owners of Australian Riptide Outboards - Call to Action

Postby AusAnzani » Thu Mar 30, 2017 8:01 am

Interesting!

I have a slightly different version of the manual, also early and sent to me by B if I remember correctly.

Image of the Fisherman outboard on page 3 clearly shows decal on the tank end/s. Decal comprises fishing boat (presumably same as that pictured on the front cover of the manual) with the Riptide name over the top.

Also in that manual the carburettor is listed as an AMAL - Single Lever Control yet I have seen numerous Boatman, Fisherman and Sportsman outboards with the SKC carby fitted.

Do know that Riptide wanted to be all Australian and moved from a 'bought in' ignition system to their own during those early years. Wander if the same desire drove the move to an SKC carburettor? Are SKC carbies Australian made???????

Regards,
S

AusAnzani
Posts: 644
Joined: Wed May 21, 2014 10:47 am
Location: Australia
Contact:

Re: Owners of Australian Riptide Outboards - Call to Action

Postby AusAnzani » Thu Mar 30, 2017 8:13 am

Here you go:

Image


Return to “Other Old Outboards (Non-Seagulls)”

Who is online

Users browsing this forum: No registered users and 1 guest