Avon Redcrest with 40+ short shaft suitability?

Talk about and buy or sell boats that are suited to Seagull outboards here

Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo

Post Reply
Posts: 3
Joined: Mon Jul 02, 2018 6:26 pm
Location: Tayside

Avon Redcrest with 40+ short shaft suitability?

Post by Tinker » Mon Jul 02, 2018 10:41 pm

Looking for an inflatable to potter about on Scottish lochs. I have a 40+ short shaft I'm ready to buy. I plan to strip and rebuild it. Just wondering how this combination Will work out? I've read a lot of conflicting accounts.

Posts: 790
Joined: Mon Feb 27, 2012 9:47 pm
Location: Cirencester

Re: Avon Redcrest with 40+ short shaft suitability?

Post by Gannet » Mon Jul 09, 2018 5:28 pm

I often use my Avon Redcrest in conjunction with an FV. The combination works quite well. I cannot see why the extra weight and thrust from a 40+ would be a problem. In fact it would probably work better, especially with a heavier load om board.
The only thing that l have found is that the standard Avon outboard bracket brings the engine quite close the water level especially if the Avon is not pumped up hard. I modified the wooden part of the bracket so that it gave more tilt to the engine, which did help. So keep it hard for best results!


Post Reply