Saving Old Seagulls

What no brass spiltpin on the prop shaft!

Bermudan Flea?

They aren't that bad they are grade 2 rapids barely noticeable just keep to the right they are just after the dam you can see them in google earth,
Ask Andy about the rock wall just stay in the middle and you will be right.

That depends on how fast you are going! I'm sure like me Andy won't mind letting you go through the rapids and rock wall first.
What class will you be racing?

Yes the villiers carb is correct as it is as Century 100 that was before I put new cable on and striped and repainted the tank for the swap.
That was my second motor Ive built ,Not bad for a 16 year old , The clamps I degreased and sand blasted.

Good Tinker have a few new race motors . Swapped a motor i built up out of bits for those motors (attached) Should be able to build two good 102's out of the four ,a silver century or two and use the 40+ and 40- for parts on my other 2.5's Your right about the miserable weather chilli dog, I spent t...

Tell me about it just wait till you start picking them up in flocks

I would say the pinion bush is worn.

He's right seagull did make there own charging unit

Hi
Could someone post a photo with daimentions on the spacer between the flywheel and starter cup on the Wipac MK4 igniton

Cheers Cam

Do you think this would work well as replacement for dead Seagull CDI?
Chicken

https://picasaweb.google.com/1053607529 ... llRace2012#

Here you go , no doubt Pete will have many many more.
Chicken

Just a few, will put all up on picasa with a link later

Further along now, but looking great, should be out to test early next week after school.

chicken

Cost me $50nz =25 GBP
Everything is there for the SJP and will use the WS for parts to build up a WS with another one i have for parts.

Chicken