Saving Old Seagulls

Not 100% of the model , welcome to be corrected.

£20 including UK Post.

I used this method in the end, I cut up a load of thick copper wire into a polishing media similar to pins, added a bit of degreaser and every time I'm waiting for the kettle to boil in the workshop I gave it a good shaking, its removed all the flaky crud and it's getting back to clean brass inside....

I used this method in the end, I cut up a load of thick copper wire into a polishing media similar to pins, added a bit of degreaser and every time I'm waiting for the kettle to boil in the workshop I gave it a good shaking, its removed all the flaky crud and it's getting back to clean brass inside....

I have boiled it out with citric acid and shaken it up with copper nails inside, it's not going to be practical to clean it this way, has anyone tried epoxy fuel tank lining ?

I have a 102 with brass tank which is full of verdigris, how do I clean it out ?

Any chemicals that will do it?

Need these snapped bracket parts for a 102.

Posted in the UK.

40 series bracket
£20
£3.50 postage.

20220929_140750

20220929_140805

I had a nice chug up the river with my trusty 102 today, and spent a not so relaxing afternoon on the river bank taking the BL***y ! thing apart to get to a blockage in the block water inlet, there's nothing better on a sunny day in Buckinghamshire to be covered in oily gunge, petrol all over the pl...

Is this a suitable oil for a 102 ?

OK got it now, thanks.

I couldn't get a 1.5 mm wire in there much. I was thinking acid would do a better job ?

Maybe electrolosis ?

Stripped it down today, and a nice lump of rust was blocking the water outlet in the block, I didn't have the time or tools to take the head off, but I will have to give it a proper clean out at some point.

Anyone tell me the correct way the lever goes on the stud ? My guess is spring first, then lever through the large beveled hole, then washer and nut ? The bolt through the main tube locking ring should be at the spark plug end ? The end of the operating rod should ride over the locking ring to keep ...

I haven't got time to strip the whole thing down, can't I flush it out ?

I was running along fine, but must have picked up some weed or leaves.

Got a water blockage in my 102, no output from the pee hole. Can anyone tell me the drill for clearing water stoppages please.

I've got no hose to back flush it where I am, but I've got compressed air, and various wires to poke it with.