Saving Old Seagulls

Hi,
The decals are 200mm x 41mm and can be obtained from Classic Transfers
Gloucestershire UK.

Hi
Is there anybody in possesion of a decent oil/petrol mixture tank transfer
off an Anzani Pilot 30.
Many thanks
Ken
Cheshire Cat 4

Hi,
I am trying to have some Anzani Pilot 30 tank decals made
could anybody tell me the dimensions length/depth,
these are the gold winged decals that fit either side of the tank
there is a left and a right side ,
Any pictures of a decent decal would also be appreciated
Ken
CC4

Hi,everybody
Can anybody out there send me a good anzani pilot tank transfer photo
the gold coloured one with wings that goes either side of the tank, measurements
would also be very helpful
Ken
Cheshire Cat 4

Wishing you all a very Merry Christmas and a Happy New Year
and thank you all for the help you have given me in the past
Ken,
Cheshire Cat 4

Hi,
Could somebody tell me if the gasket between the water pump housing and the gearbox
on my Forty + is fitted dry or should it have some kind of gasket solution on it
Many thanks
Cheshire Cat 4

"A Happy New Year"
To gull owners everywhere
Take care
Cheshire Cat 4

Hi Nudge,
Have you solved your problem regarding HT lead & fuel pipe
if not I can send you the bits that you need
PM me
Ken
Cheshire Cat 4

Well what a surprise
Fat wallet wins again

Hi Oyster 49, Many thanks for your reply regarding Anzani gearbox bush removal I have managed to remove the same using a 14mm tap which was screwed into the end of the bush (Just about one thread) I then heated the casing popped the tap end into the vice and gently tapped the casing off the bearing ...

Hi all, " Happy New Year," Can anybody give me any advise on removing a gearbox bush from an Anzani Pilot gearbox it has a 1/2" bore and is rather worn to say the least I am hoping to replace the bearing with an off the shelf item as I have only limited workshop facilities, Or maybe s...

Hi all,
Here are some pictures of my refurbished Anzani Pilot as promised
Many thanks to everybody who helped me
CC4

Hi All,
Here are a few photos of my Anzani Pilot as requested by Aus Anzani
There is just the tank left to refurbish
Thanks to all who helped me
CC4

Hi Rick UK,
Thanks for your reply I am looking for anything Anzani Pilot related,
I am also trying to find a conrod for Aus Anzani to help him complete
that lovely restoration of his
PM me or email me at ann@lapmckindley.fsnet.co.uk
Many thanks
CC4

Hi everyone,
Has anyone out there any British Anzani Pilot spare parts
anything considered W.H.Y.
Many thanks
CC4