Search found 47 matches

by Andy stubbs
Sat Jun 08, 2019 11:31 pm
Forum: For Sale
Topic: Curlew
Replies: 4
Views: 2864

Re: Curlew

Now sold thanks
by Andy stubbs
Sun Mar 17, 2019 10:26 pm
Forum: For Sale
Topic: Curlew
Replies: 4
Views: 2864

Re: Curlew

IMG_20190317_210851.jpg
by Andy stubbs
Wed Mar 13, 2019 5:17 pm
Forum: For Sale
Topic: Curlew
Replies: 4
Views: 2864

Curlew

Curlew short shaft for sale, runs well, a little scruffy and floods a little if not running and fuel not turned off.
£95 please
Will try and add some pictures later
by Andy stubbs
Fri Jan 23, 2015 7:33 pm
Forum: For Sale
Topic: FREE
Replies: 2
Views: 2527

Re: FREE

Had a play while removing transom bracket today and managed to move flywheel with a little force and gearbox moves and bolts do not seem to be too seized
by Andy stubbs
Thu Jan 22, 2015 11:53 pm
Forum: For Sale
Topic: FREE
Replies: 2
Views: 2527

Re: FREE

Still up for grabs apart from transom bracket
by Andy stubbs
Wed Jan 21, 2015 1:50 pm
Forum: For Sale
Topic: FREE
Replies: 2
Views: 2527

FREE

Any one want this, free
gearbox moves and feels ok, but engine seized.
good for parts maybe
Free and to be collected unless you want to pay for pick up by courier in Gloucester, I do travel to Torbay regularly so maybe able to arrange something on route.
Jap engine but not sure make of outboard
by Andy stubbs
Tue Dec 02, 2014 6:24 pm
Forum: Other Old Outboards (Non-Seagulls)
Topic: what's this ?
Replies: 6
Views: 4442

Re: what's this ?

Yes the finned extension/ mating piece between exhaust port and leg tube is what is shown on the thread JAP, think this one has been bodged with flexible conduit or alike
by Andy stubbs
Mon Dec 01, 2014 3:42 pm
Forum: Other Old Outboards (Non-Seagulls)
Topic: what's this ?
Replies: 6
Views: 4442

Re: what's this ?

Just found another one on here under the thread "Jap"
by Andy stubbs
Wed Nov 26, 2014 12:54 am
Forum: Other Old Outboards (Non-Seagulls)
Topic: chrysler 4 carb settings?
Replies: 1
Views: 2091

chrysler 4 carb settings?

Can anyone help with the carb settings on this Chrysler 4. It has the adjuster for rich/lean at the bottom of the carb by screwing the needle valve in/out. Cleaned out tank and gave it a general clean and with playing with carb settings managed to get it to fire into life. Any help with this and inf...
by Andy stubbs
Wed Nov 26, 2014 12:37 am
Forum: Other Old Outboards (Non-Seagulls)
Topic: what's this ?
Replies: 6
Views: 4442

what's this ?

Just picked this up along with a chrysler 4 hp, it has a jap engine but not sure of the make of outboard
by Andy stubbs
Fri Feb 07, 2014 6:06 pm
Forum: Wanted
Topic: Wanted- Gearbox for SJM / Forty minus / featherweight
Replies: 2
Views: 2875

Re: Wanted- Gearbox for SJM / Forty minus / featherweight

Hi,I could do with one of these as have one that someone had put back together wrong and now damaged
by Andy stubbs
Wed Jan 01, 2014 8:50 pm
Forum: General Topics
Topic: Bargain
Replies: 1
Views: 1924

Bargain

Anyone need one of these, think I might rob my Granny for hers

http://www.ebay.co.uk/itm/Outboard-moto ... 19e6ef3519
by Andy stubbs
Tue Dec 31, 2013 11:29 am
Forum: General Topics
Topic: 4 stroke outboards
Replies: 15
Views: 7733

Re: 4 stroke outboards

I had a Mariner 3.5 4 stroke and it was gutless compared to a Tohatsu 3.5 2 stroke that I have now, it was a pain to store in a vehicle when travelling with the oil running into the cylinder and then a pain to start and not that much better on fuel from memory, 2 stroke all the time for portable pow...
by Andy stubbs
Tue Sep 17, 2013 12:45 pm
Forum: Boats Suitable For Seagulls
Topic: 1970's 11ft Dunlop C-Craft inflatable
Replies: 4
Views: 6343

Re: 1970's 11ft Dunlop C-Craft inflatable

Managed to get it in the water this year and powered it with a Seagull 40 plus and the Mariner in picture, a little sluggish with the seagull but moved it along ok for such a big inflatable as they are not the easiest of things to move in water
by Andy stubbs
Wed Nov 28, 2012 10:35 am
Forum: Help
Topic: Forty Minus
Replies: 2
Views: 2573

Re: Forty Minus

Once it stated to move it wasn't to bad to drift out, trying to use a drift on the angle wasn't the best but the only way i suppose. Will have to get hold of the shim once I measure the movement in the shaft. Thanks Oyster 49